Luminetworx PoE LED Driver is a low-voltage power and network connected devices that use PoE technology. Each driver connects to a Luminetworx switch port with a Category Cable. The Luminetworx POE LED Driver is a Universal Power over Ethernet (UPoE) compliant device. UPoE extends the IEEE PoE Plus (PoE+) standard (IEEE 802.3bt) to double the power per port to 60W using four pairs. 

 

Luminetworx PoE LED Driver

After power negotiation, a secure connection is established between the gateway and the network. The driver is then able to distribute power and data to lights, sensors, and other devices locally and across multiple locations. The network communication allows easy convergence of IP infrastructure securely using Luminetworx technology. Data and commands can be easily passed and integrated with other systems for data analytic needs in a building automation control installation.

On the device side, the PoE LED Driver provides power and data using a rugged and robust interface. The Luminetworx interface is optimized to deliver low voltage power and reliable communication with lights, sensors, and other devices.

Input Power

IEEE 802.3af/at/bt compliant

Item Number

LVEDRVPOE

Working Voltage

DC 50-57V, rated value 56V

Output Voltage

DC 30-42V, rated value 33V, no more than input voltage when no load

Output Current 

0.9A ± 5%

Output Power 

rated value 30W (33V 0.9A)

Communication Method

Network

Protection Level IP50, indoor use only
Driver Dimensions

45mm (width) * 140mm (length) * 30mm (height)

Housing Material PC, IP20 rated
Input Interface

RJ45 female connection with extension cord

(50CM)

Output Interface

DC005 female connection with extension cable

(11CM)

Luminetworx PoE LED Driver

Product Features
1.Drive LED light with constant current mode
2. Connect to mobile APP via Wi-Fi for remote control
3. Support brightness dimming
4. Quickly turn the input power on and off, forcibly enter the pairing network
5. With overheat protection and short circuit protection

6. Firmware supports OTA upgrade

Direction for operation:

1.Confirm the rated voltage before the installation to keep the product from being damaged.

2.Cut off the power until the installation is finished.

3.Contact us when any problems happen, never open the product without permission.

4.Basic electronic knowledge or professional indication is needed for operator.

5.Product surface temperature control during normal operation environment within 65 ℃, the bad environment to reduce product life cycle.

6.Never use the product in a humid environment

 

Warranty replacement excludes certain types of physical damage such as fire, flood/moisture, or tampering (in the circumstance that a fixture is improperly removed from its mount or connection causing it to fail).